Logo Search packages:      
Sourcecode: qi version File versions  Download package

linux-mmc-protocol.h

/*
 * Header for MultiMediaCard (MMC)
 *
 * Copyright 2002 Hewlett-Packard Company
 *
 * Use consistent with the GNU GPL is permitted,
 * provided that this copyright notice is
 * preserved in its entirety in all copies and derived works.
 *
 * HEWLETT-PACKARD COMPANY MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
 * AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS
 * FITNESS FOR ANY PARTICULAR PURPOSE.
 *
 * Many thanks to Alessandro Rubini and Jonathan Corbet!
 *
 * Based strongly on code by:
 *
 * Author: Yong-iL Joh <tolkien@mizi.com>
 * Date  : $Date: 2006/12/06 02:50:52 $
 *
 * Author:  Andrew Christian
 *          15 May 2002
 */

#ifndef MMC_MMC_PROTOCOL_H
#define MMC_MMC_PROTOCOL_H

#ifdef CONFIG_SUPPORT_MMC_PLUS
/* Standard MMC commands (4.2)           type  argument     response */
#else
/* Standard MMC commands (3.1)           type  argument     response */
#endif
   /* class 1 */
#define     MMC_GO_IDLE_STATE         0   /* bc                          */
#define MMC_SEND_OP_COND          1   /* bcr  [31:0] OCR         R3  */
#define MMC_ALL_SEND_CID          2   /* bcr                     R2  */
#define MMC_SET_RELATIVE_ADDR     3   /* ac   [31:16] RCA        R1  */
#define MMC_SET_DSR               4   /* bc   [31:16] RCA            */
#define MMC_SWITCH                6   /* ac                      R1b */
#define MMC_SELECT_CARD           7   /* ac   [31:16] RCA        R1  */
#define MMC_SEND_EXT_CSD          8   /* adtc                    R1  */
#define MMC_SEND_CSD              9   /* ac   [31:16] RCA        R2  */
#define MMC_SEND_CID             10   /* ac   [31:16] RCA        R2  */
#define MMC_READ_DAT_UNTIL_STOP  11   /* adtc [31:0] dadr        R1  */
#define MMC_STOP_TRANSMISSION    12   /* ac                      R1b */
#define MMC_SEND_STATUS          13   /* ac   [31:16] RCA        R1  */
#define MMC_BUSTEST_R            14   /* adtc                    R1  */
#define MMC_GO_INACTIVE_STATE    15   /* ac   [31:16] RCA            */
#define MMC_BUSTEST_W            19   /* adtc                    R1  */

  /* class 2 */
#define MMC_SET_BLOCKLEN         16   /* ac   [31:0] block len   R1  */
#define MMC_READ_SINGLE_BLOCK    17   /* adtc [31:0] data addr   R1  */
#define MMC_READ_MULTIPLE_BLOCK  18   /* adtc [31:0] data addr   R1  */

  /* class 3 */
#define MMC_WRITE_DAT_UNTIL_STOP 20   /* adtc [31:0] data addr   R1  */

  /* class 4 */
#define MMC_SET_BLOCK_COUNT      23   /* adtc [31:0] data addr   R1  */
#define MMC_WRITE_BLOCK          24   /* adtc [31:0] data addr   R1  */
#define MMC_WRITE_MULTIPLE_BLOCK 25   /* adtc                    R1  */
#define MMC_PROGRAM_CID          26   /* adtc                    R1  */
#define MMC_PROGRAM_CSD          27   /* adtc                    R1  */

  /* class 6 */
#define MMC_SET_WRITE_PROT       28   /* ac   [31:0] data addr   R1b */
#define MMC_CLR_WRITE_PROT       29   /* ac   [31:0] data addr   R1b */
#define MMC_SEND_WRITE_PROT      30   /* adtc [31:0] wpdata addr R1  */

  /* class 5 */
#define MMC_ERASE_GROUP_START    35   /* ac   [31:0] data addr   R1  */
#define MMC_ERASE_GROUP_END      36   /* ac   [31:0] data addr   R1  */
#define MMC_ERASE                38   /* ac                      R1b */

  /* class 9 */
#define MMC_FAST_IO              39   /* ac   <Complex>          R4  */
#define MMC_GO_IRQ_STATE         40   /* bcr                     R5  */

  /* class 7 */
#define MMC_LOCK_UNLOCK          42   /* adtc                    R1b */

  /* class 8 */
#define MMC_APP_CMD              55   /* ac   [31:16] RCA        R1  */
#define MMC_GEN_CMD              56   /* adtc [0] RD/WR          R1  */

/* SD commands                           type  argument     response */
  /* class 8 */
/* This is basically the same command as for MMC with some quirks. */
#define SD_SEND_RELATIVE_ADDR     3   /* ac                      R6  */

  /* Application commands */
#define SD_APP_SET_BUS_WIDTH      6   /* ac   [1:0] bus width    R1  */
#define SD_APP_OP_COND           41   /* bcr  [31:0] OCR         R3  */
#define SD_APP_SEND_SCR          51   /* adtc                    R1  */

/*
  MMC status in R1
  Type
      e : error bit
      s : status bit
      r : detected and set for the actual command response
      x : detected and set during command execution. the host must poll
            the card by sending status command in order to read these bits.
  Clear condition
      a : according to the card state
      b : always related to the previous command. Reception of
            a valid command will clear it (with a delay of one command)
      c : clear by read
 */

#define R1_OUT_OF_RANGE       (1 << 31)   /* er, c */
#define R1_ADDRESS_ERROR      (1 << 30)   /* erx, c */
#define R1_BLOCK_LEN_ERROR    (1 << 29)   /* er, c */
#define R1_ERASE_SEQ_ERROR      (1 << 28) /* er, c */
#define R1_ERASE_PARAM        (1 << 27)   /* ex, c */
#define R1_WP_VIOLATION       (1 << 26)   /* erx, c */
#define R1_CARD_IS_LOCKED     (1 << 25)   /* sx, a */
#define R1_LOCK_UNLOCK_FAILED (1 << 24)   /* erx, c */
#define R1_COM_CRC_ERROR      (1 << 23)   /* er, b */
#define R1_ILLEGAL_COMMAND    (1 << 22)   /* er, b */
#define R1_CARD_ECC_FAILED    (1 << 21)   /* ex, c */
#define R1_CC_ERROR           (1 << 20)   /* erx, c */
#define R1_ERROR        (1 << 19)   /* erx, c */
#define R1_UNDERRUN           (1 << 18)   /* ex, c */
#define R1_OVERRUN            (1 << 17)   /* ex, c */
#define R1_CID_CSD_OVERWRITE  (1 << 16)   /* erx, c, CID/CSD overwrite */
#define R1_WP_ERASE_SKIP      (1 << 15)   /* sx, c */
#define R1_CARD_ECC_DISABLED  (1 << 14)   /* sx, a */
#define R1_ERASE_RESET        (1 << 13)   /* sr, c */
#define R1_STATUS(x)            (x & 0xFFFFE000)
#define R1_CURRENT_STATE(x)         ((x & 0x00001E00) >> 9) /* sx, b (4 bits) */
#define R1_READY_FOR_DATA     (1 << 8)    /* sx, a */
#define R1_APP_CMD            (1 << 5)    /* sr, c */

/*
  MMC CURRENT_STATE  in R1 [12:9]
 */
#define STATE_IDLE      (0x0 << 9)      /* 0 */
#define STATE_READY     (0x1 << 9)      /* 1 */
#define STATE_IDENT     (0x2 << 9)      /* 2 */
#define STATE_STBY      (0x3 << 9)      /* 3 */
#define STATE_TRAN      (0x4 << 9)      /* 4 */
#define STATE_DATA      (0x5 << 9)      /* 5 */
#define STATE_RCV       (0x6 << 9)      /* 6 */
#define STATE_PRG       (0x7 << 9)      /* 7 */
#define STATE_DIS       (0x8 << 9)      /* 8 */
#define STATE_BTST      (0x9 << 9)      /* 9 */

/* These are unpacked versions of the actual responses */

00152 struct _mmc_csd {
      u8  csd_structure;
      u8  spec_vers;
      u8  taac;
      u8  nsac;
      u8  tran_speed;
      u16 ccc;
      u8  read_bl_len;
      u8  read_bl_partial;
      u8  write_blk_misalign;
      u8  read_blk_misalign;
      u8  dsr_imp;
      u16 c_size;
      u8  vdd_r_curr_min;
      u8  vdd_r_curr_max;
      u8  vdd_w_curr_min;
      u8  vdd_w_curr_max;
      u8  c_size_mult;
      union {
            struct { /* MMC system specification version 3.1 */
                  u8  erase_grp_size;
                  u8  erase_grp_mult;
            } v31;
            struct { /* MMC system specification version 2.2 */
                  u8  sector_size;
                  u8  erase_grp_size;
            } v22;
      } erase;
      u8  wp_grp_size;
      u8  wp_grp_enable;
      u8  default_ecc;
      u8  r2w_factor;
      u8  write_bl_len;
      u8  write_bl_partial;
      u8  file_format_grp;
      u8  copy;
      u8  perm_write_protect;
      u8  tmp_write_protect;
      u8  file_format;
      u8  ecc;
};

00194 struct _mmc_ext_csd {
        u8  s_cmd_set;
        u32  sec_count;
        u8  MIN_PERF_W_8_52;
        u8  MIN_PERF_R_8_52;
        u8  MIN_PERF_W_8_26_4_52;
        u8  MIN_PERF_R_8_26_4_52;
        u8  MIN_PERF_W_4_26;
        u8  MIN_PERF_R_4_26;
        u8  PWR_CL_26_360;
        u8  PWR_CL_52_360;
        u8  PWR_CL_26_195;
        u8  PWR_CL_52_195;
        u8  card_type;
        u8  csd_structure;
        u8  ext_csd_rev;
        u8  cmd_set;
        u8  cmd_set_rev;
        u8  power_class;
        u8  hs_timing;
        u8  bus_width;
};

#define MMC_VDD_145_150 0x00000001  /* VDD voltage 1.45 - 1.50 */
#define MMC_VDD_150_155 0x00000002  /* VDD voltage 1.50 - 1.55 */
#define MMC_VDD_155_160 0x00000004  /* VDD voltage 1.55 - 1.60 */
#define MMC_VDD_160_165 0x00000008  /* VDD voltage 1.60 - 1.65 */
#define MMC_VDD_165_170 0x00000010  /* VDD voltage 1.65 - 1.70 */
#define MMC_VDD_17_18   0x00000020  /* VDD voltage 1.7 - 1.8 */
#define MMC_VDD_18_19   0x00000040  /* VDD voltage 1.8 - 1.9 */
#define MMC_VDD_19_20   0x00000080  /* VDD voltage 1.9 - 2.0 */
#define MMC_VDD_20_21   0x00000100  /* VDD voltage 2.0 ~ 2.1 */
#define MMC_VDD_21_22   0x00000200  /* VDD voltage 2.1 ~ 2.2 */
#define MMC_VDD_22_23   0x00000400  /* VDD voltage 2.2 ~ 2.3 */
#define MMC_VDD_23_24   0x00000800  /* VDD voltage 2.3 ~ 2.4 */
#define MMC_VDD_24_25   0x00001000  /* VDD voltage 2.4 ~ 2.5 */
#define MMC_VDD_25_26   0x00002000  /* VDD voltage 2.5 ~ 2.6 */
#define MMC_VDD_26_27   0x00004000  /* VDD voltage 2.6 ~ 2.7 */
#define MMC_VDD_27_28   0x00008000  /* VDD voltage 2.7 ~ 2.8 */
#define MMC_VDD_28_29   0x00010000  /* VDD voltage 2.8 ~ 2.9 */
#define MMC_VDD_29_30   0x00020000  /* VDD voltage 2.9 ~ 3.0 */
#define MMC_VDD_30_31   0x00040000  /* VDD voltage 3.0 ~ 3.1 */
#define MMC_VDD_31_32   0x00080000  /* VDD voltage 3.1 ~ 3.2 */
#define MMC_VDD_32_33   0x00100000  /* VDD voltage 3.2 ~ 3.3 */
#define MMC_VDD_33_34   0x00200000  /* VDD voltage 3.3 ~ 3.4 */
#define MMC_VDD_34_35   0x00400000  /* VDD voltage 3.4 ~ 3.5 */
#define MMC_VDD_35_36   0x00800000  /* VDD voltage 3.5 ~ 3.6 */
#define MMC_CARD_BUSY   0x80000000  /* Card Power up status bit */

/*
 * Card Command Classes (CCC)
 */
#define CCC_BASIC       (1<<0)      /* (0) Basic protocol functions */
                              /* (CMD0,1,2,3,4,7,9,10,12,13,15) */
#define CCC_STREAM_READ       (1<<1)      /* (1) Stream read commands */
                              /* (CMD11) */
#define CCC_BLOCK_READ        (1<<2)      /* (2) Block read commands */
                              /* (CMD16,17,18) */
#define CCC_STREAM_WRITE      (1<<3)      /* (3) Stream write commands */
                              /* (CMD20) */
#define CCC_BLOCK_WRITE       (1<<4)      /* (4) Block write commands */
                              /* (CMD16,24,25,26,27) */
#define CCC_ERASE       (1<<5)      /* (5) Ability to erase blocks */
                              /* (CMD32,33,34,35,36,37,38,39) */
#define CCC_WRITE_PROT        (1<<6)      /* (6) Able to write protect blocks */
                              /* (CMD28,29,30) */
#define CCC_LOCK_CARD         (1<<7)      /* (7) Able to lock down card */
                              /* (CMD16,CMD42) */
#define CCC_APP_SPEC          (1<<8)      /* (8) Application specific */
                              /* (CMD55,56,57,ACMD*) */
#define CCC_IO_MODE           (1<<9)      /* (9) I/O mode */
                              /* (CMD5,39,40,52,53) */
#define CCC_SWITCH            (1<<10)     /* (10) High speed switch */
                              /* (CMD6,34,35,36,37,50) */
                              /* (11) Reserved */
                              /* (CMD?) */

/*
 * CSD field definitions
 */

#define CSD_STRUCT_VER_1_0  0           /* Valid for system specification 1.0 - 1.2 */
#define CSD_STRUCT_VER_1_1  1           /* Valid for system specification 1.4 - 2.2 */
#define CSD_STRUCT_VER_1_2  2           /* Valid for system specification 3.1       */

#define CSD_SPEC_VER_0      0           /* Implements system specification 1.0 - 1.2 */
#define CSD_SPEC_VER_1      1           /* Implements system specification 1.4 */
#define CSD_SPEC_VER_2      2           /* Implements system specification 2.0 - 2.2 */
#define CSD_SPEC_VER_3      3           /* Implements system specification 3.1 */
#define CSD_SPEC_VER_4      4       /* Implements system specification 4.0 ~ 4.2 */

/*
 * SD bus widths
 */
#define SD_BUS_WIDTH_1      0
#define SD_BUS_WIDTH_4      2

/*
 * EXT_CSD field definitions
 */

/*
 * S_CMD_SET
 */

#define STANDARD_MMC    0       /* Standard MMC */
#define SECURE_MMC      1       /* Secure MMC */
#define CPS_MMC         2       /* Content Protection Secure MMC */
#define SECURE_MMC_2    3       /* Secure MMC 2.0 */
#define ATA_MMC         4       /* ATA on MMC */

/*
 * MIN_PERF_a_b_ff
 */
#define NO_CLASS        0x0     /* For cards not reaching the 2.4MB/s minimum value */
#define CLASS_A         0x08    /* Class A */
#define CLASS_B         0x0A    /* Class B */
#define CLASS_C         0x0F    /* Class C */
#define CLASS_D         0x14    /* Class D */
#define CLASS_E         0x1E    /* Class E */
#define CLASS_F         0x28    /* Class F */
#define CLASS_G         0x32    /* Class G */
#define CLASS_H         0x3c    /* Class H */
#define CLASS_J         0x46    /* Class J */
#define CLASS_K         0x50    /* Class E */
#define CLASS_M         0x64    /* Class M */
#define CLASS_O         0x78    /* Class O */
#define CLASS_R         0x8c    /* Class R */
#define CLASS_T         0xa0    /* Class T */

/*
 * CARD_TYPE
 */

#define MMCPLUS_26MHZ   (1<<0)
#define MMCPLUS_52MHZ   (1<<1)

/*
 * EXT_CSD_REV
 */

#define EXT_CSD_REV_1_0 0
#define EXT_CSD_REV_1_1 1
#define EXT_CSD_REV_1_2 2

/*
 * HS_TIMING
 */
#define HS_TIMING_LOW   0
#define HS_TIMING_HIGH  1

/*
 * BUS_WIDTH
 */
#define MMCPLUS_BUS_WIDTH_1   0
#define MMCPLUS_BUS_WIDTH_4   1
#define MMCPLUS_BUS_WIDTH_8   2


/*
 * ERASED_MEM_CONT
 */

#define ERASED_MEM_CONT_0       0
#define ERASED_MEM_CONT_1       1

/*
 * Argument for CMD6
 */

/*
 * EXT_CSD Access Modes
 */

#define EXT_CSD_COMMAND_SET     0
#define EXT_CSD_SET_BITS        1
#define EXT_CSD_CLEAR_BITS      2
#define EXT_CSD_WRITE_BYTE      3

/*
 * EXT_CSD Argument Byte
 */

#define EXT_CSD_POWER_CLASS    187
#define EXT_CSD_BUS_WIDTH      183
#define EXT_CSD_HS_TIMING      185

#endif  /* MMC_MMC_PROTOCOL_H */


Generated by  Doxygen 1.6.0   Back to index